The different layouts between wing turnstiles and tripod turnstiles

时间：2024-07-31人气：作者：小编

The different layouts between wing turnstiles and tripod turnstiles

How to choose a gate? When purchasing a gate, you don’t necessarily have to choose the most expensive or the best one. It should be the most suitable product within the appropriate budget. The following is an example of a factory using tripod turnstiles as channel control equipment. The tripod turnstile should be selected according to the following conditions. Let me explain how to choose the turnstile product. The specific environments where the gate is used are listed below.

The gate is installed at the factory gate.

The difference between wing turnstile and tripod turnstile
There are 3,000 people in the factory. 1,000 people per shift
All shuttles arrive within 10 minutes

1. Consider the speed of use.

Prevent long waits when commuting to and from get off work. 1,000 people per shift. 100 people need to pass every minute; all pass within 10 minutes. The traffic speed of the tripod turnstile is 25-35 people/minute. Calculated based on 20 people/minute; the actual time depends on usage habits and access control system response time. Ensure that there will be no conflict between people entering and exiting during shift change times. At least 5 tripod turnstiles are required. The frequency of use of tripod turnstiles during commuting is close to 100%

2. Consider the frequency of use of the gate.

The gates of attractions are used at various times of the day, which reflects the difference in frequency of gate use between factories and attractions; factory gates are most frequently used when commuting to and from get off work. The usage frequency during peak hours will be close to 100% if 5 tripod turnstiles are used. If using a 100% frequency machine. But if you use equipment with a frequency of 40%, five devices can suffice. A quantity of more than 13 units is required; to play a suitable role. The right product for the right place. Reduce future equipment maintenance and upgrade costs.

3. Consider the service life of the gate.

Assume using 5 devices. Each machine works 1,200 times a day, and each person enters and exits once a day. It works about 400,000 times a year; choose equipment with a lifespan of less than 1 million times. Large-scale failure of major components will occur in less than a year, and the overall lifespan will be 2-3 years. Needs to be replaced; choose equipment with a fault-free operating frequency of 3-5 million times. The overall service life is more than 10 years; the main components can work without failure for 5-10 years.

The difference between wing turnstile and tripod turnstile

4. Consider the aesthetics of the gate.

Semi-open-air use requires cities close to the sea. ;Use the three-roller turnstile with ordinary shell materials and spray-painted plastics with caution. Imported or higher grade is better; at least AISI304 stainless steel.
Internal anti-corrosion treatment material thickness. Water chestnut treatment. Brushed finish.
There is a lot of foot traffic. If the requirements cannot be met, there is not enough space for the tripod turnstile. You can consider choosing fast-track products. Compared with tripod turnstiles, express lanes are more beautiful, faster, safer and more convenient. Although it is more expensive, there are obstacles to widespread application due to price issues. However, in foreign-invested factories with more advanced concepts, fast lanes are destined to become an increasingly popular product, playing an important role that cannot be replaced by tripod turnstiles.
Good fast track products are about speed. There is an absolute advantage in longevity and frequency. Among pedestrian passage products, it is unmatched by other products and has become the first choice for access control products for large/super large factories or high-rise office buildings. Even during the peak hours of commuting, it can still be handled easily without setting it to a normally open state, which greatly improves safety and overall efficiency.
Guangzhou Jinaiyi Electronic Technology Co., Ltd. specializes in the research and development and production of tripod turnstiles/intelligent barrier gates/road gates/swing gates/full-height turnstiles, and is committed to customizing personalized intelligent channel solutions, intelligent security management systems, intelligent access control, attendance, Consumption, fee management, ticketing and other systems provide civilized and orderly access to communities, exhibitions, halls, canteens, hotels, museums, gyms, clubs, subways, stations, docks, schools, prisons, stations and other places.
The product shell is all made of stainless steel plates, and the internal components of the box are all made of stainless steel or treated with anti-rust and anti-corrosion treatment. It is durable, anti-rust, and has strong resistance to damage. Smooth operation, no jitter; low noise, low power consumption, energy saving and environmental protection. Welcome to call us!
What is the difference between wing turnstile and tripod turnstile, which one is better?
Editor: Wing gate manufacturer Views: 111 times Release time: 2016-06-14
With the development of science and technology, pedestrian crossing gates are more and more widely used in daily life. Currently, wing gates and tripod turnstiles are widely used. So, which one is better, wing turnstile or tripod turnstile? Let’s find out!
Which one is better, wing turnstile or tripod turnstile? In fact, passage gate equipment with different appearances will bring different experiences to different use occasions (such as high-end office buildings, airports, government departments, factories, BRT, subways, high-speed railways, etc.).
Wing gates are often used in government units because of their beautiful and elegant appearance, which gives people a sense of solemnity.
The three-roller turnstile adopts the method of rotating turnstiles and is commonly used in pedestrian passages and automatic ticket collection management, such as government agencies, factories and enterprises, intelligent buildings, residential areas, scenic spots and venues, colleges and universities, kindergartens, stations, leisure and entertainment venues, etc.
Which one is better, wing gate or three-roller gate? The intelligent development of visitor management system. In view of the numerous selections of passage gate products, the key to the selection of passage control products by the user is whether the selected passage product can meet the requirements of the user. Whether the appearance and functional requirements can truly achieve the purpose of safety management in the end. For now, most channel gate users use a combination of manual management and equipment management to effectively manage the managed areas. This method takes advantage of the flexibility of manual management and the intelligent characteristics of intelligent equipment, allowing the user to transform from a completely manual management method to an era that combines manual management and equipment management, greatly improving work efficiency and at the same time strengthening the use of The safety management awareness of the unit has been enhanced and safety management has been enhanced to a certain extent.
In the future, as people consider labor costs, the combination of manual management and equipment management will gradually be replaced by self-service visitor terminals, truly realizing unmanned and efficient management.
The difference between wing turnstile and tripod turnstile:
1. Different opening times. Due to different working mechanisms, the opening speeds are also different. The opening and closing time of the wing gate can basically be controlled at about 0.5 seconds, while the opening and closing time of the tripod turnstile is about 1 second.
2. Different working methods. Wing turnstiles use motors to work, while tripod turnstiles (except fully automatic) work using a combination of optocoupler reset + mechanical reset and manual propulsion.
3. Different channel functions: Small suitcases and other items can be passed through the channel of the wing gate (drag method), but not the tripod turnstile.
4. Due to the different shapes, the passage time is barrier-free when the wing turnstile is opened. People can pass quickly, and the fastest can reach 1.5-2 seconds/person, while the maximum passage speed of the tripod turnstile (actual calculation) 2.5-3 seconds/person.
5. Different performance. The tripod turnstile is a primary dissuasion device, which only has a guiding role and does not provide safety. The wing gate has anti-climbing alarm, anti-trailing alarm, anti-pinch electronic eye and other functions, and is a product with a relatively high safety level.
6. Different costs. The tripod turnstile is an entry-level channel product and can only be used for civilian-level channels, while the wing gate is an intermediate product that can support high-traffic places such as civil-level and rail transit. The price is several times higher.